Amplificator Powersoft T602

SKU: T602

18.062,94 lei
15.178,94 lei fără TVA

Disponibil pentru precomandă

0 People watching this product now!

Livrare rapidă

Produs garantat

Consultanță

Calitate garantată

Descriere

Amplificator de inalta performanta cu doua canale cu DSP si Dante™

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

  • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
  • Full control with a PC running Armonía. Here it can be in mixed groups with advanced EQ together with other Powersoft products.
  • Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
  • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
  • Group controllable advanced EQ with raised cosine filters
  • Large preset library
  • Preset compatibility with X Series
  • Very long FIR filters (42.6 ms)
  • Control and monitoring through ArmoníaPlus
General
Number of channels 2
Output power Single channel mode   Bridge mode
  4 Ω 8 Ω         8 Ω    
2500 W 1300 W 5000W
Max output voltage / current 145 Vpeak / 100 Apeak
AC Main Power
Power supply Universal, regulated switch mode
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V – 264 V
Power consuption** 115 V 230 V
Idle 32 W 32 W
1/8 of max output power @ 4 Ω 824 W 7.6 A 839 W 4.3 A
Thermal
Operating temperature range 0° – 45° C – 32° – 113° F
Thermal dissipation** 115 V 230 V
1/8 of max output power @ 4 Ω 678 BTU/h 170.9 kcal/h 731 BTU/h 184.2 kcal/h
AUDIO
Gain 32dB
Input sensitivity 2.57 Vrms
Max input level 24dBu
Frequency response 20 Hz – 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio > 110 dB (20 Hz – 20 kHz, A weighted)
Crosstalk separation <-70 dB @ 1kHz
THD+N < 0.1% (typical < 0.5%)
IMD < 0.1% (typical < 0.5%)
Input impedance 20 kΩ balanced
DSP
AD Converter 24 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range – 0.005% THD+N
DA Converter 24 Bit Tandem™ @ 48 kHz 117 dB-A Dynamic Range – 0.003% THD+N
Memory/presets 256 MB (RAM) plus 512 MB flash for presets /
Input equalizer Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Delay 2 s (input) + 100 ms (output) for time alignment
Limiters TruePower™, RMS voltage, RMS current, Peak limiter
Damping control Active DampingControl™ and LiveImpedance™ measurement
Front panel
Indicators and Controllers 8 x Push-button – Setting operating parameters
1 x Display – Settings and monitoring
1 x Power switch –
Connectors
AC main 1 x IEC C20 connector – 20 A max (region-specific power cord provided)
Audio signal input 2 x XLR – Signal input
Loudspeakers 2 x speakON – Neutrik NL4MD
Network/data 1 x Rj45 socket – RS485 data connection (non-DSP version)
1 x Rj45 socket – DANTE®
Construction
Dimensions (L x H x W) 484 mm x 44.5 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
Weight 7.5 kg (16.5 lb)
Informații suplimentare
Greutate 7,00000000 kg
Dimensiuni 48,0 × 40,0 × 4,0 cm
Interfață

Control si monitorizare prin ArmoníaPlus

Număr canale

Doua

Putere per canal

2500 W / 4 ohmi, 1300 W / 8 ohmi, 5000 W / 8 ohmi in bridge

tip amplificator

De linie

Crossover

linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)

Brand

Powersoft

Recenzii (0)

Recenzii

Nu există recenzii până acum.

Fii primul care adaugi o recenzie la „Amplificator Powersoft T602”

Adresa ta de email nu va fi publicată. Câmpurile obligatorii sunt marcate cu *